©Johnstone Supply eCatalog 216

HAND TOOLS Sheet Metal Duct & Ductboard Tools

Adjustable Sheet Metal Scribe • Measure, mark and scribe trim lines in one easy operation • Adjustable from 1/4” to 12-1/2”

• No special point required — uses a standard 6 x 3/8” screw • Rust resistant nickel plated steel construction

Each

Order # Mfg. # H26-885 A60

46.99

Dividers • Scribes a thin, accurate line time after time • Points are easily resharpenable or replaced

• Nickel-plated steel body

Each

Order # Mfg. #

Description

Length

H24-859 18 H85-508 24

32” Max Circle Diameter 42” Max Circle Diameter

11”

42.99 55.00

13-1/2”

Trammel Point • Expands to a 42” radius and creates an 84” diameter

• Points are resharpenable • Telescoping arms are nickel plated to resist corrosion • Handle features a comfortable vinyl grip

• Minimum radius is 12” • All steel construction

Each

Order # Mfg. # H85-385 TR42

89.00

Tinners Circumference Rule • 48” L x 1-1/4” W x 1/16” D

Each

Order # Mfg. # H93-079 48BS

215.00

Folding Tools • H25-171 , H25-170 and H26-567 fold 24 to 30 gauge sheet metal

• H26-033 adjustable tool folds up to 26 gauge sheet metal

Each

Fig. Order # Mfg. #

Depth

Length

H25-171 H25-170

A A A

12F 18F

3/8” and 1” 3/8” and 1” 3/8” and 1”

12” 18” 24”

40.99 59.00 85.00

A

H26-567 24F

Offset Duct Stretcher • Use stretcher to hold duct in place with one hand, while slipping drive cleats in place with other hand • Additional spacing holes allow wheels to be adjusted

• Offset handle eliminates knuckle contact • Anodized aluminum body with large vinyl cushion grip

Each

Order # Mfg. # H24-858 DS2

79.00

Locking Duct Stretcher • Frees both hands to align and install drive cleats • Tool locks on from either side of duct connection

• Large wheel clearance captures even misshapen flanges • Tool can push, hammer and bend cleats as necessary • Offset design keeps hands away from work

Each

Order # Mfg. # H25-831 DS3

99.00

1420

©2023 Johnstone Supply, LLC