©Johnstone Supply eCatalog 216

HAND TOOLS Sheet Metal Duct & Ductboard Tools

Valve Action™ Liquid Paint Markers • Marking range: -50°F to +150°F • Marks with real paint, dries in three minutes • Marks on all surfaces • Lead-free, low halogens

• Meets California VOC regulations WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Each

Order #

Mfg. # 96822 96823 96820

Description

H26-437 H26-438 H28-465

Red Paint Marker Black Paint Marker White Paint Marker

14.49 14.49 14.49

INKZALL ® Black Fine Point Markers • Clog resistant and durable marker tip writes on rough, dusty, wet and oily surfaces • Ink dries in seconds

• Includes lanyard hole, anti-roll body design and built-in hard hat storage clip

Each 2.59 6.15 6.15

Order # Mfg. #

Description

H28-076 H28-077

48-22-3100 48-22-3105

INKZALL Black Fine Point Marker

INKZALL Black Fine Point Marker (2-Pk.) INKZALL Black Medium Chisel Point Marker

H28-402 48-22-3130

Flex Duct Cutters • Double-edged knife blade cleanly pierces through outer skin, insulation and liner of flexible round duct • Blade cuts both directions, from any angle and around entire duct circumference

• Duct´s exposed wire rib coil can be snipped in the jaws of the built-in wire cutter • Non-slip vinyl grips with hand stops • H27-227 includes a tie tensioning mechanism to easily install nylon tie straps without the need for a separate tensioning tool

Each

Order # Mfg. # H25-217 FDC1

Desription

Flex Duct Cutter

125.00 215.00

H27-227

FDC3

Flex Duct Cutter with Tensioning Tool

Flex Duct Shear • Cuts insulated flexible round duct and duct wire rib coil • Heavy-duty wire cutter is located away from scissor blades

• Thumb operated latch ensures sharpened blade edges stay closed when not in use • Non-slip vinyl grips with hand stops

Each

Order # Mfg. # H26-034 FDC2

145.00

Pipe and Duct Holder • Holds duct in place, either between or under joists until properly secured • Holders also open wide and clamp securely for use on engineered wood joists

• Includes pair of clamps and 4’ of 125 lb. tensile strength linked chain — all nickel plated steel

Each

Order # Mfg. # H26-598 2DH

105.00

Tensioning Tools • Attaches nylon ties to flex duct and sheet metal take-offs • Works on all ties including thin designs

• Comfortable cushion grip handles • H24-583 requires manual cut-off • H26-011 is adjustable with auto cut-off

Each

Fig. Order # Mfg. #

Description

H24-583 TY4G

A B

Tensioning Tool

115.00 149.00

A

B

H26-011

TY6

High Leverage Tensioning Tool

1421

JohnstoneSupply.com