©Johnstone Supply eCatalog 216

HAND TOOLS Sheet Metal Duct & Ductboard Tools

Hand Seamers • REDLINE™ ergonomically contoured non-slip handles • Makes permanent, tight-fitting seams • Jaws are drop-forged, high impact steel • Scaled depth marks on jaws are in 1/4” increments for precise depth bends

• Latch allows for easy open and close with one hand • H26-876 is for use overhead or in confined areas

Each

Fig. Order # Mfg. #

Description

H26-875 H26-876

A B A

S2R S3R

3-1/4” Hand Seamer

149.00 165.00 215.00

3-1/4” Offset Hand Seamer

A

B

H26-877 S6R

6” Hand Seamer

Crimpers • REDLINE™ ergonomically contoured non-slip handles • Long, shallow crimps allow for a tighter fitting, more self supporting connection

• Latch allows for easy open and close with one hand • H26-878 is ideal for crimping heavy 24 to 22 gauge sheet metal • H26-880 is for use overhead or in confined areas

Each

Fig. Order # Mfg. #

Description

H26-878 H26-879

A A B

SC3R

3-Blade Crimper 5-Blade Crimper

109.00 105.00 139.00

C5R

A

B

H26-880 C6R

Offset 5-Blade Crimper

Snap Lock Punches • REDLINE™ ergonomically contoured non-slip handles • Joins sheet metal, duct and pipe sections • Raises a louvered projection on metal edge for locking into rolled edge of sheet or piece to be joined

• Compound handle leverage for maximum ease of operation • Heavy-forged steel cutting jaw • Latch allows for easy open and close with one hand • H26-882 is not recommended for heavy gauge sheet metal

Each

Order # Mfg. #

Description

Depth

H26-881

SL1R

Snap Lock Punch

3/8"

159.00 125.00

H26-882 SL2R

Adjustable Snap Lock Punch 1/4" to 5/8"

Hand Notchers • REDLINE™ ergonomically contoured non-slip handles • Hook design of cutting jaw facilitates notching to desired depth without slippage

• Latch allows for easy open and close with one hand • H26-883 makes a clean 30° V-shaped cut • H26-884 punches a large 1” deep V-notch in 24 to 30 gauge sheet metal

Each

Order # Mfg. # H26-883 N1R H26-884 N2R

Depth 13/16"

149.00 159.00

1"

Scratch Awls • Scribes lines on sheet metal, plastic and a variety of other materials

• 1/4” x 4” blade is tapered and can be resharpened many times • Handle is shock and shatter-resistant

Each

Order # Mfg. #

Description

Length 6-1/4" 7-3/4"

H26-025

A2

2-1/4” Stubby Handle 3-3/4” Regular Handle

17.99 18.99

H26-030 A20

Sheet Metal Scribe • Places common trim lines on sheet metal quickly and accurately • Dual-edged scribing points

• Creates clean, readable score lines parallel to edge of metal sheet • Ten pre-set depths from 1/8” to 1

Each 9.09

Order # Mfg. # H25-832 A40

1419

JohnstoneSupply.com