©Johnstone Supply eCatalog 216

DIRECT DRIVE MOTORS 4-7/16" Diameter Shaded Pole

Totally Enclosed Fan and Blower Motor PSC Unit Heater Applications: • Direct drive furnace blowers, shaft mounted

• Auto protector • Leads: 60" long, with 1/4" straight terminals • Shaft: flatted • Capacitor and capacitor housing included • Three thru-bolts on a 4.42" diameter bolt circle • Replaces mfg. #322P611

fans, unit heaters or any continuous duty application where the motor is located in the airstream Features: • Continuous duty, air over

Shaft Diam.

Shaft Length Rot.

Bearing Type

Each

Order # Mfg. # S88-287 U6520

Diam.

HP 1/8

Volts

RPM Speeds F/L Amps Efficiency

“A” Dim.

“R” Dim.

Wt. Lbs.

5"

115

1075 1

2.60 65% 1/2"

2-1/4"

Rev.

3-7/8"

4-5/8"

Slv

12.2

805.00

Open Ventilated Refrigeration Replacement Motors Shaded Pole Applications:

• These four motor ratings replace 21 of GE’s 21/29 frame designs • 1/2" shaft adapter included, mechanically reversible • Extended studs on 3-1/2" bolt circle for stud mounting (mounting washers and nuts included) • Extended hubs with 2-1/4" rubber rings for base mounting • Automatic reset thermal protection

• Unit cooler fans and blowers, refrigeration cabinets, unit heaters, space heaters, remote air conditioners, blower units and other air moving applications • For many popular commercial condensing units (Copeland, Tecumseh, Hussmann, Tyler, etc.) Features: • Single-speed, all-angle sleeve bearing, 42Y frame

F/L Amps Efficiency

Shaft Diam.

Shaft Length Rot.

Bearing Type

Wt. Lbs. 11.4 12.0 10.2 10.0

Each

Order # Mfg. #

Diam.

HP Volts

RPM Speeds

“A” Dim.

“R” Dim.

S88-444 RF6402 5" S88-445 RF6403 5"

1/10 115/208-230 1050 1 1/10 115/208-230 1050 1 1/10 115/208-230 1550 1 1/10 115/208-230 1550 1

4.00 35% 3/8" 4.00 35% 3/8" 4.00 35% 3/8" 4.00 35% 3/8"

2-1/4" CWSE - Mech. Rev. 3-13/16" 4-9/16" Slv 2-1/4" CCWSE - Mech. Rev. 3-13/16" 4-9/16" Slv 2-1/4" CWSE - Mech. Rev. 3-13/16" 4-9/16" Slv 2-1/4" CCWSE - Mech. Rev. 3-13/16" 4-9/16" Slv

449.00 455.00 425.00 425.00

S88-442

RF4400 5"

S88-443 RF4401 5"

Lug Mounting Brackets • For 3.3" through 5-5/8" diameter motors • Large lug size have 3/4" slot and small lug size have 1/4" slot

• A: approximate motor diameter • B: minimum bolt circle mounting diameter • C: maximum bolt circle mounting diameter

Each

Each

Order # A

B

C

Order # A

B

C

S58-406 3-3/8"

S58-410 S58-411 S58-412 S58-413

4-5/8" 5-7/8" 5-1/2" 6-3/4"

5-7/8" 9-7/8" 6-3/4"

44.49 49.99 31.99 44.49

5" 5"

6-5/16" 7-9/16"

7-9/16" 11-9/16" 8-1/8" 12-1/8"

40.99 55.00 40.49 47.49

S58-407

3-3/8"

S58-408 4-1/4" S58-409 4-1/4"

5-5/8" 5-5/8"

6-7/8" 8-1/8"

10-3/4"

Totally Enclosed Unit Heater Motors Shaded Pole Applications: • S89-090 replaces Reznor #170-45330, A.O. Smith #319P657 and many others • S89-091 replaces A.O. Smith #319P209, 319P227, 319P424 and 322P199 Features:

• 2-1/2" diameter mounting rings included Note: S89-090 does not include mounting rings and is not CSA approved.

Shaft Diam.

Shaft Length Rot.

Bearing Type

Each

Order # Mfg. # S89-090 70224

Diam.

HP

Volts

RPM Speeds F/L Amps Efficiency

“A” Dim.

Wt. Lbs.

5" 5"

1/20 1/15

115 115

1050 1 1050 1

2.30 3.30

35% 1/2" 35% 1/2"

3"

CWSE 3-7/8" CWSE 3-1/2"

Slv Slv

7.0 7.0

565.00 475.00

S89-091

40387

2-5/8"

9

JohnstoneSupply.com