©Johnstone Supply eCatalog 216

DIRECT DRIVE MOTORS 3-3/8" Diameter Shaded Pole

Internally Fan-Cooled Motors Shaded Pole Applications: • For use on fans, blowers and small pumps where motor is isolated from air stream Features: • Continuous duty • Studs: four on 2.84" centers, #8-32 thread

• Sleeve bearing, thermal overload protection • Open construction Note: S58-701 has four studs opposite shaft end; S58-786 is double shaft with 3-1/4" extension each end.

Shaft Diam.

Shaft Length Rot.

Bearing Type

Each

Order # Mfg. #

Diam. 3-3/8" 3-3/8" 3-3/8" 3-3/8" 3-3/8"

HP

Volts 115 230 115 115 115

RPM Speeds F/L Amps Efficiency

“A” Dim.

Wt. Lbs.

S58-701 S58-510 S58-224 S58-786

D167 D608 D130 D209

1/70 1/50 1/40 1/30 1/30

1500 1 3000 1 1500 1 3000 1 3000 1

0.70 0.60 1.00 1.10 1.10

35% 1/4" 35% 1/4" 35% 5/16" 35% 1/4" 35% 1/4"

3"

CWSE 2-7/8"

Slv Slv Slv Slv Slv

2.5 3.0 2.8 3.0 3.0

349.00 315.00 289.00 305.00 295.00

1-5/16" CWSE 3-3/4"

4-1/8" 3-1/4"

CWSE 3-1/3" CCWOSE 3-5/8" CWSE 3-5/8"

S89-088 D208

3"

11 Frame Replacement Motors Shaded Pole Applications: • Replaces GE motors in air conditioners, unit heaters, commercial condensing units, unit cooler fans, blowers and refrigeration cabinets

Features: • Ball bearings, resilient rings for base mounting, and tapped mounting holes

Shaft Diam.

Shaft Length Rot.

Bearing Type

Each

Order # Mfg. # S58-534 81671 S58-535 81672

Diam. 3-3/8" 3-3/8"

HP

Volts

RPM Speeds F/L Amps Efficiency

“A” Dim.

Wt. Lbs.

1/15 1/15

115/230 1550 1 115/230 1550 1

2.10 2.10

35% 5/16" 35% 5/16"

1-5/8" 1-5/8"

CCWSE 4-1/2" CWSE 4-1/2"

Ball Ball

5.0 5.0

355.00 355.00

Open Ventilated Air Over Motors for Fans and Roof Ventilators Shaded Pole Replacements for Sears, Acme and Others Applications:

Features: • Thermally protected, 60 Hz • Shafts: flatted • Studs: four studs on 3.89" centers, shaft end, 1/2" long all motors • S89-442 is a replacement for Leslie Locke #7108-5056

• Replacements for motors used on roof ventilators, may also be used on fan and blower applications where the motor is located in the air system

A

B

Each

Fig. Order #

Mfg. #

Diam.

HP

Volts RPM Speeds F/L Amps Efficiency Shaft Diam. Shaft Length Rot.

“A” Dim.

Bearing Type Wt. Lbs.

S89-441 S88-238 S89-442 S87-975 S88-229 S89-087

A A A A B A

D170 4-7/16" D116 4-7/16" D310 4-7/16" D119 4-2/5" D174 4-2/5" D374 4-2/5"

1/20 1/15 1/12

115 1500 1 115 1500 1 115 1500 1

1.70 2.40 4.00 2.90 3.50 4.00

35% 5/16" 35% 3/8" 35% 3/8" 35% 1/2" 35% 3/8" 35% 3/8"

2-1/4" 2-3/8"

CWSE 2-3/4"

Slv Slv Slv Ball Slv Slv

4.5 5.0 4.5 6.0 6.5 6.5

549.00 439.00 515.00 465.00 565.00 869.00

CWSE 3"

2"

CWSE 2-3/8" CCWSE 3-3/4" CWSE 3-3/8" CWSE 3-5/8"

1/11-1/35 115 1500 3

2-5/8" 2-7/8" 2-1/2"

1/10

115 1500 1

1/8-1/20 115 1500 2

Totally Enclosed Unit Heater Motors Shaded Pole Applications: • Used for Modine and Reznor unit heaters Features: • Single-speed

• Totally enclosed, non-ventilated • Sleeve bearing

Shaft Diam.

Shaft Length Rot.

Bearing Type

Each

Order # Mfg. # S88-836 D113

Diam. 4-2/5" 4-2/5" 4-2/5"

HP

Volts

RPM Speeds F/L Amps Efficiency

“A” Dim.

Wt. Lbs.

1/12 1/12 1/12

115/230 1550 1 115/230 1550 1 115/230 1550 1

2.50 2.50 2.50

35% 3/8" 35% 3/8" 35% 1/2"

3" 3" 2"

CCWSE 4-1/8" CWSE 4-1/8" CCWSE 4-1/8"

Slv Slv Slv

9.0 9.0 9.0

949.00 935.00 935.00

S88-837

D114

S88-838 D115

8

©2023 Johnstone Supply, LLC