©Johnstone Supply eCatalog 216

DEFINITE PURPOSE MOTORS Bath Vent & Range Hood Motors

Fasco Fan and Heater Motors • S58-558 is designed as a replacement for Fasco 115V motors used in range hoods and bath vents • S58-559 is a 230V Fasco wall heater motor

• Both are shaded pole, two pole, single speed with large oil reserves and heavy-duty bearings to provide extended life without relubrication

Stack Height

Shaft Length 1-1/8" 1-5/16"

Bearing Type

Each

Order # Mfg. # S58-558 K100 S58-559 K101

HP

Volts 115 230

RPM Speeds

F/L Amps Efficiency Shaft Diam.

Rot.

Wt. Lbs.

1/100 1/150

5/8"

2750 1260

1 1

0.73 0.52

28% 40/221" 28% 3/16"

CWSE Slv CCWSE Slv

1.5 2.1

155.00 245.00

1-1/4"

Unit Bearing Agitator Motors For Ice Machines and Beverage Dispensers • Direct replacements for ice machines and beverage dispensers manufactured by Cornelius, Scotsman, Reed, Vendo, Alco, Booth, Rowe and others • S58-537 and S58-538 have threaded shafts 1/4"-20 by 1/2" long at shaft end • S58-539 has two pin holes #52 approximately 3-1/2" apart

• S58-662 shaft has 3/4" flat • S58-540 has one pin hole 0.095" diameter 3/8" from end of shaft • Stainless steel shafts match originals • Each motor comes packed with 11 #8-36

screws for mounting • Overload protected • Cast iron body

Each

Order # Mfg. #

Diam.

Watts

Volts

RPM 1500 1500 1500 1500 1500

Speeds

F/L Amps

Shaft Diam.

Shaft Length Rot.

S58-537 S58-538 S58-539 S58-662

ESP-L15EMJR1 3-25/32" ESP-L15EMJR1B1 3-25/32" ESP-L15EMJ1B4 3-25/32" ESP-OL15EMJR11 3-25/32"

15 15 15 15 25

115 115 115 115 115

1 1 1 1 1

0.60 0.60 0.60 0.60 1.10

5/16" 5/16" 5/16" 5/16" 5/16"

5" 7" 9" 7" 7"

CCWSE CCWLE CCWSE CCWSE CWSE

279.00 315.00 295.00 285.00 289.00

S58-540 ESP-L25MJR1B1 3-25/32"

Heating, Ventilating, and Welding Unit Motors • Continuous duty, air over • 60 Hz Features:

• All-angle sleeve bearings, automatic thermal overload protection • Open design, shaded pole, no mounting rings

A

B

Shaft Diam.

Shaft Length Rot.

Bearing Type

Each

Fig. Order # Mfg. #

Diam.

HP

Volts 115 230

RPM Speeds F/L Amps Efficiency

“A” Dim.

Wt. Lbs.

S58-907 84A

A B

4-5/16" 1/10 4-5/16" 1/10

850 850

1 1

4.00 2.20

35% 3/8" 35% 3/8"

2-1/2" 2-1/2"

CWSE 4.0" CCWSE 4"

Slv Slv

—

625.00 645.00

S58-175

309

8.3

Carbonator Pump Motors Split-Phase Applications: • Carbonator pumps, direct drive gear and vane-type pumps, utility pumps Features: • Continuous duty, 40°C ambient

• Automatic reset thermal protector • 5/8" quiet all-angle bearings • Open dripproof enclosure • Thrust bearing carries up to 25 lbs. end thrust

Each

Order # Mfg. #

Diam. 5-5/8" 5-5/8" 5-5/8"

HP 1/4 1/3 1/3

Volts

RPM 1725

Speeds

F/L Amps

Rot.

Bearing Type Wt. Lbs.

S88-821

4725

115

1 1 1

5.00 5.60 5.60

CCW

Slv Ball Slv

12.0 14.0 12.0

435.00 519.00 415.00

S88-842 4805

100-120/200-240 1725

Rev. Rev.

S88-822

4406

115

1725

63

JohnstoneSupply.com