©Johnstone Supply eCatalog 216

DEFINITE PURPOSE MOTORS Bath Vent & Range Hood Motors

Direct Replacement Motors For Broan Bathroom Ventilators • Direct replacement “C” frame motors and matching wheels for Broan ventilators • 120V, 60 Hz • Plastic impeller wheels

• Parts may be adapted to fit many other brands of ventilators using similar motor and wheel assemblies

A

B

C

Each

Fig. Order # Mfg. #

Stack Height Volts RPM Speeds F/L Amps Shaft Diam.

Shaft Length Rot.

Bearing Type Replaces

S58-461 S58-497

A A A B C

65216

5/8"

120 3000 1 120 — 1 120 — 1 120 3000 1 120 3000 2

0.51

40/221"

1-1/2"

CCWSE Slv CCW — CCW — CCW — CCW Slv

998080090, 99080216

85.00

S9980166 7/8"

— 7/32" — 1/4"

1-7/32" 2-3/4" 1-3/8"

— —

115.00 149.00

S58-499 S9980159 7/8"

S59-439 65094 S59-440 65366

7/8"

1.40 0.50

7/32" 3/16"

99080094, 99080099, 99080166

89.00 69.00

5/8

1-1/4"

99080365

Impeller Wheels • S58-462 replaces Broan #99110379 • S58-503 replaces Broan #S99110446

Each 8.39

Fig. Order # Description

Diam.

Width

Hub Bore

S58-462 CCW, D-Push-On 4-9/16"

A B

1"

0.181" 0.219"

A

B

S58-503

CCW, D-Push-On 5-1/8"

1-1/8"

65.00

Direct Replacement Kitchen Vent Hood Motor For GE, Dyna Vent and Gaffers & Sattler • 120V, 60 Hz, 2-speed (1500/3000 RPM) kitchen vent hood motor

• Replaces GE #WB26X24, WB26X40, WB26X44; mfg. #WB26X45; Gem #EM685 Note: Not CSA approved.

Each

Order # Mfg. # S58-491 65685

Stack Height Volts

RPM 3000

Speeds

F/L Amps Efficiency Shaft Diam. Shaft Length Rot.

Bearing Type Wt. Lbs.

1"

120

2

1.41

30% 3/16"

1-3/4"

CWSE Slv

0.8

239.00

Shaded Pole, C-Frame Motors • For air coolers, displays, kitchen fans, portable room heaters, food dehydrators and applications where a tight fit is mandatory • Shaft rides on self-aligning, pre-oiled, sintered bearings for long life and minimum noise • All motors have thermal protection (either impedance protection or thermal device)

• Clockwise rotation facing output shaft, direction reversed by changing motor field • Two #6-32 stud bolts extending 1/2" from stack on 1-7/8" centers; two 5/32" mounting holes on each side of stack on 1-7/8" centers; 60 Hz • S58-283 is a 2-speed

Stack Height

Shaft Length

Bearing Type

Each

Order # Mfg. # S58-426 65426

HP

Volts 240 120 120 120 120 240

RPM Speeds

F/L Amps Efficiency Shaft Diam.

Rot.

Wt. Lbs.

1/1000 3/8"

3000 3000 3000 3000 3000 3000

1 1 1 1 2 1

0.21 0.26 0.41 0.43 0.76 0.88

30% 40/221" 30% 40/221" 30% 3/16" 30% 3/16" 30% 40/221"

1" 1" 1" 1" 1" 1"

CWSE Slv CWSE Slv CWSE Slv CWSE Slv CWSE Slv CWSE Slv

0.3 0.5 1.1 0.5 0.3 3.0

135.00 109.00 125.00 119.00 179.00 245.00

S58-210 S58-211 S58-212 S58-283

65210 65693 65694 65283

1/500 1/250 1/150

3/8" 1/2" 5/8" 7/8"

1/65 1/30

S58-428 65428

1-1/2"

30% 1/4"

62

©2023 Johnstone Supply, LLC