©Johnstone Supply eCatalog 216

HVAC CONTROLS Gas Ignition Controls

Universal Intermittent Spark Ignition Control • Microprocessor-based ignition control

• LED diagnostic indicator Specifications: • Electrical rating: 24VAC • Flame out recognition time: 8 Sec.

• For use in natural and LP gas applications • Works with single rod or dual rod remote sensor • Provides ignition, proof of ignition and precise timing

Each

Order # Mfg. #

Description

L51-064 50D50U-843

Intermittent Pilot/Direct Spark Ignition Module

389.00

Key

Reset Time

Retries

Prepurge

Safety Time 90 Seconds 90 Seconds 30 Seconds 30 Seconds 60 Seconds

Key

Reset Time

Retries

Prepurge

Safety Time 60 Seconds 15 Seconds Continuous 4 Seconds 4 Seconds

A B C D E

300 Seconds — 300 Seconds — 300 Seconds — 300 Seconds — 300 Seconds 2

—

F

300 Seconds 2 300 Seconds —

30 Seconds

30 Seconds

G H

—

—

—

—

30 Seconds

30 Seconds

I

300 Seconds — 300 Seconds —

—

—

J

30 Seconds

Universal Intermittent Pilot Control • Replacement for over 400 Honeywell (including S8610U1003), Robertshaw, Johnson Controls and UTEC (HSC) intermittent pilot ignition controls • Used for gas-fired furnaces, boilers and other heating equipment • Field-selectable prepurge and ignition trial timings • LED flame strength indicator • Diagnostic LED for easy troubleshooting • EnviraCOM communications port • 100% pilot gas shutoff if pilot fails to light

• Ignition trial/delay sequence repeats until appliance lights or call for heat is removed; eliminates nuisance lockouts • One model suitable for use with natural or LP gas • Includes remote reset and automatic vent damper plug • Used in systems with combination ignitor sensor (single rod or sense) or separate ignitor and sensor (dual rod or remote sense) • Includes cable adapters to allow field replacement of both Honeywell and competitive controls without replacing existing cable

Each

Order # Mfg. #

Description

L37-808 S8610U3009

Control Module

355.00

36" Ignition Cable Assembly • For use with the S86/S87 family

• A right angle boot on the ignitor end and a straight boot on the module end

Each

Order # Mfg. #

Description

L45-645 392125-2

36" Ignition Cable Assembly

135.00

DSI Furnace Control Boards • DSI Control board to control gas valve, blower, indoor motors, spark ignitor • Monitors timing, trial for ignition, flame sensing and lockout

• Microprocessor-based, 100% lockout safety feature • Compatible with LP or Natural Gas WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

A

B

Each

Fig. Order #

Mfg. #

Ignition Trial Time Ignition Trials

Lockout Timing Prepurge Period For Use With

Description

L45-903

A

ICM291 5 + 2 Seconds Every 20 seconds for 15 min

Manual Reset 45 seconds OEM Replacement for Carrier: LH33WP003, LH33WP003A

Furnace Control Board

545.00

L45-904

ICM292 7 Seconds

Two groups of two 1 hour

30 seconds OEM Replacement for Rheem: 62-24140-04 Furnace Control Board

415.00

B

372

©2023 Johnstone Supply, LLC