©Johnstone Supply eCatalog 216

COMMERCIAL CONTROLS Pneumatics

Integral Thermostat and Piston Top Valve Actuator • Combination pneumatic thermostat and valve

valve which takes a V-3000-1 and V-3000 8011 actuator • Includes a protective snap-on cover • Factory set for a nominal adjustment of ± 7.5°F (± 4°C) • Includes pointer tabs to restrict the temperature adjustment range to as little as ± 2.5°F (± 1.4°C) • Requires dual supply air pressures of 15 and 20 PSIG (105 and 140 kPa) Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

actuator providing proportional control of a steam or water valve in a heating/cooling application • Designed for use with a valve-controlled terminal air conditioning unit • Equipped with liquid filled bulb temperature measuring element • Includes a built-in restrictor in the supply air connection • Equipped with an external setpoint adjustment • Fits any Johnson Controls 1/2" through 2" NPT normally open, normally closed, or mixing

Each

Order #

Mfg. #

Description

Mounting

L46-450

T-3311-1 Direct Acting 15PSIG, Reverse Acting 20PSIG

Valve Top

1245.00

Valve Linkage Kits • Used for mounting M9000 series actuators on VG1000 series ball valves • L46-281 ensures stable actuator mounting while preventing loading on the valve stem and stem seals

• L46-596 provides thermal isolation and permits use of actuators on VG1000 valves with low pressure steam

A

B

Fig. Order # Mfg. #

Description

For Use With

— L48-997 — L47-339

M9000-151 Base Mount Linkage Kit

M9000 Actuators

M9000-156 Includes: Mounting Bracket, Drive Shaft, LVR27A-602 Actuator Crankarm, Phillips Thread-Forming Screws , Self-Drilling Screws M9000-157 Includes: Mounting Bracket, Drive Shaft, LVR27A-602 Actuator Crankarm, Phillips Thread-Forming Screws , Self-Drilling Screws M9000-158 Includes: Bottom Mounting Bracket, Top Mounting Bracket, Self-Tapping HEX Washer-Head Screw M9000-165 Includes: Mounting Bracket, Drive Shaft, LVR27A-602 Actuator Crankarm, Phillips Thread-Forming Screws , Self-Drilling Screws

M920X Series Actuators

— L47-340

M9204 Series Actuators

— L47-341

Tandem Mount Two M9116-GGx or –HGx models; two M9124-AGx, -GGx, or –HGx; or two M9132-AGx or GGx models on a damper

— L47-342

M920X Series Actuators

— L48-998 M9000-270 Horizontal Remove Kit — L48-999 M9000-400 Jackshaft Mounting Kit

Dampers Dampers

L46-281 L46-596

A B

M9000-560 Ball Valve Linkage Kit M9000-561 Thermal Barrier Kit M9000-604 Anti-Rotation Bracket

M9104, M9203, M9208 Series Electric Actuators to VG1000 Series Valves

M9000-560 Ball Valve Linkage (for Low Pressure Steam)

— L49-001

M9208 and M9210 Actuators

— L49-002 M9000-605 Ball Joint Damper — L49-003 M9104-100 Conduit Adapters — L49-004 M9200-100 Conduit Fitting — L49-005 M9208-600 Kit Gripper — L49-006 M9208-601 Kit Gripper — L49-007 M9208-602 Retaining Clip — L49-008 M9208-603 Adjustable Stop Kit — L49-009 M9220-600 Jackshaft Coupler

Dampers

M9104 Actuators

M9000 Actuator Family

M9208 Actuators M9208 Actuators M9208 Actuators M9208 Actuators M9220 Actuators M9220 Actuators M9220 Actuators

— L49-010 — L49-011

M9220-601 Gripper M9220-602 Lock Clip

Valve Packing Kits • Used to repack VG7000 series brass valves • L40-412 includes two ring packs, stem wiper, insertion/removal tool, bullet, grease tube and a 3" strip of crocus cloth • L40-413 includes two ring packs, stem wiper, stem guide, insertion/removal tool, sleeve

packing installer, grease tube and a 3" strip of crocus cloth Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Order #

Mfg. #

For Use With

L40-412 L40-413

VG7000-6001 VG7000-6002

Valve sizes 1/2" to 3/4"

—

400

©2023 Johnstone Supply, LLC