©Johnstone Supply eCatalog 216

HVAC CONTROLS Commercial Kitchen Supplies

Direct Acting Thermostat • SPST 5210 Series direct acting thermostat with a special switch design makes it very sensitive to small temperature changes

• Electrical rating: 20A @ 120VAC resistive load; 15A @ 240VAC resistive load

Each

Order # Mfg. #

Temp. °F

Capillary Length

Bulb O.D. x Length 3/16" x 15-3/8"

F16-897 5210-124

60°F to 210°F

36"

365.00

Universal Commercial Infinite Switch Kits • Switch has a heavy-duty dial shaft, 2-1/8" long and grooved at standard break-off points

• Shunt-type heater for 15A loads; nominal low input of 5% with the infinite input up to 100% • F16-713 is 120V, F16-514 is 240V

Each

Each

Order # Mfg. #

Order # Mfg. #

F16-713

F16-514

5500-135M

135.00

5500-235M

115.00

FD Series Gas Thermostats • FD series gas thermostats are heavy-duty, high capacity units • Valve response is either snap throttle (FDO), using dual internal valves with full on to off operation, or throttle (FDTO-FDTH) with single internal valve and full on to bypass operation • Thermostats mount in one of four directions • Bulb size: all controls 3/16" x 14-3/4" • Uni-kits F16-111 and F16-115 include: 3/8" pipe inlets and outlets (side and rear) with two pipe plugs, 1/4" tube pilot outlets (side

and rear) with 3/16" tube adapter fittings and 1/4" tubing plugs, four-way dial, index pointer for four-way dial, index pointer for four-way mounting and rear housing gasket to allow use of original rear housing • Gas capacity: 100,000 BtuH • F16-646 , F16-647 , F16-556 and F16-648 have optional plugged side pilot and 4-way dial • F16-766 and F16-765 pipe size is tubing inlet/ outlet

A

B

Each

Fig. Order # Mfg. #

Type

Conn. Size Pipe Size

Temp. °F

Capillary Length Optional Dial

Replaces

F16-111 F16-766 F16-765 F16-647 F16-115 F16-556

A A A A B A A B

4200-025 A/FDO 4 4200-002 A/FDO 2 4200-018 A/FDO 2 4200-005 B/FDO 2 4200-026 A/FDTO 4 4200-503 A/FDTH 2

3/8"

150 to 550 54" 150 to 550 48" 150 to 550 72" 150 to 550 48" 150 to 550 48" 200 to 550 54" 300 to 650 48" 300 to 650 48"

—

Vulcan-Hart 1076522-1

855.00 719.00 755.00 795.00 695.00 789.00 635.00 725.00

7/16"

F16-669 F16-669 F16-669 F16-669

— —

3/8" 1/2" 1/2" 3/8" 1/2" 1/2"

F16-646 4200-007 A/FDO 2

South Bend 1010398 Blodgett: 11528 Wolf Range 19313

—

F16-670 F16-670

—

F16-648 4200-505 B/FDTH 2

Vulcan-Hart 1075226 & Blodgett 4606

Temperature Limit Controllers • LCH controls are manual reset with SPST switch action; if temperature exceeds fixed setting it must drop 50°F before it resets • LCC controls are automatic reset with SPDT switch action; if temperature exceeds fixed setting it must drop 25°F before it resets • LCCM controls are automatic reset with SPDT switch action; if temperature exceeds fixed setting it must drop 25°F before it resets; has

gold-plated button contacts to enable its use for millivolt and line voltage (LCC) • F16-832 has a panel nut supplied, but no stuffing box • Electrical ratings: LCH — 30A resistive load at 125, 250, 480VAC LCC — 25A resistive load at 125, 250, 480VAC; 125VA pilot duty at 125, 250VAC

A

B

C

D

E

F

G

Nickel Bulb O.D. x Length 1/4" x 4-7/8" 5/16" x 3-5/8" 1/4" x 4-7/8" 5/16" x 3-5/8" 1/4" x 4-7/8"

Nickel Plated Stuffing Box Supplied

Replaces Rob ertshaw #

Each

Fig. Order # Switch Type

Fixed Temp.

Capillary Length

Bracket Type

F16-832 F16-622 F16-831 F16-830 F16-623

A C D E E

LCH LCH

440°F 440°F 450°F 450°F 450°F

24" 36" 24" 30" 30"

6 4 3 1 1

— —

5225-054 5225-046 5225-112 5225-009 5225-044

415.00 535.00 559.00 625.00

LCHM

1/4"

LCH LCH

—

3/8"

635.00 continued on next page

392

©2023 Johnstone Supply, LLC