©Johnstone Supply eCatalog 216

CONDENSER FAN MOTORS 48 Frame Permanent Split Capacitor

Condenser Fan/Heat Pump Motors PSC, 48Y Frame, Open Air Over Applications: • For horizontal or vertical shaft up mounting in heat pump applications, central air conditioning outdoor condenser fans where motor is located directly in the air stream Features:

• Continuous duty, designed for frame band mounting or with four #8-32 thru-bolts extended -1/2” (except S87-990 which has 1-5/8” thru-bolts) • Frame drilled and tapped with two 11/64” diameter holes for capacitor mounting when required • Shaft 6” long with two flats 90° apart • Electrically reversible rotation

• Automatic thermal protection • Water slinger on shaft end

• End bell on shaft end is totally enclosed with water slinger on shaft, end bell opposite shaft end is open

Shaft Diam.

Shaft Length Rot.

Bearing Type Wt. Lbs.

Capacitor To Match

Each

Order # Mfg. # S88-094 X087

Diam.

HP

Volts

RPM Speeds F/L Amps Efficiency

“A” Dim. “R” Dim.

5-5/8" 1/4 5-5/8" 1/4 5-5/8" 1/4 5-5/8" 1/4 5-5/8" 1/3 5-5/8" 1/3 5-5/8" 1/2 5-5/8" 1/2 5-5/8" 3/4

208-230 1075 1 208-230 1075 2 208-230 1625 1 208-230 825 1 208-230 1075 1 208-230 1075 2 208-230 1075 2 208-230 825 1 208-230 1075 2

2.00 — 1/2" 1.90 — 1/2" 1.80 — 1/2" 1.80 55% 1/2" 3.00 — 1/2" 3.00 — 1/2" 4.20 — 1/2" 3.30 — 1/2" 5.10 — 1/2"

6" 6" 6" 6" 6" 6" 6" 6" 6"

Rev. Rev. Rev. Rev. Rev. Rev. Rev. Rev. Rev.

4-1/4" 5-1/16" Slv 4-1/4" 5-1/16" Ball 4-1/2" 4-13/16" Ball 4-1/4" 4-13/16" Ball 4-3/4" 5-9/16" Slv 4-3/4" 5-9/16" Ball 5-1/2" 6-1/16" Ball 5-1/4" 5-13/16" Ball 5-1/2" 6-1/16" Ball

12.0 G21-930 11.0 G21-930 12.0 G21-930 13.0 G21-930 12.0 G21-930 17.0 G21-930 19.0 G21-891 18.0 G21-891 18.0 G21-897

359.00 525.00 435.00 635.00 385.00 555.00 555.00 855.00 709.00

S87-987

X081

S88-423 X012

S88-356

X097

S88-095 X088

S87-989 S88-357 S88-358 S87-992

X083 X096 X098 X085

Direct Drive Condenser Fan Motors PSC, 48Y Frame, Totally Enclosed Air Over Applications: • Direct drive condenser fans for all angle mounting. Needs to be mounted in the airflow of the fan for proper cooling. Features: • Automatic thermal protection • Condensate drain holes • Rotation: reversible with use of quick connectors • Slinger on shaft

• High breakdown torque • High temperature thermal protector reduces nuisance tripping Note: Drain holes with removable plugs are located in each end bracket. Remove the plug on the bottom when the motor is installed. Leads: 36"; shaft: two flats, 90° apart; studs: four, 1-1/2" long on 5.12" bolt circle, #8-32 thread.

Shaft Diam.

Shaft Length Rot.

Bearing Type

Capacitor To Match

Each

Order # Mfg. #

Diam. 5-5/8" 5-5/8" 5-5/8" 5-5/8" 5-5/8" 5-5/8" 5-5/8"

HP 1/4 1/4 1/3 1/3 1/2 1/2 3/4

Volts

RPM Speeds F/L Amps Efficiency

“A” Dim.

Wt. Lbs.

S88-157 S88-529 S88-158 S88-159 S88-557 S88-214

X412 X467 X413 X414 X468 X469

208-230 1075 1 208-230 1625 1 208-230 1075 1 208-230 1625 1 208-230 1075 1 208-230 1625 1 208-230 1075 1

1.40 — 1/2" 2.00 — 1/2" 1.90 68% 1/2" 2.00 — 1/2" 2.70 — 1/2" 2.90 — 1/2" 4.20 70% 1/2"

6" 6" 6" 6" 6" 6" 6"

Rev. Rev. Rev. Rev. Rev. Rev. Rev.

4-7/16" Ball 4-7/16" Ball 4-15/16" Ball 4-15/16" Ball 5-7/16" Ball

13.0 G21-930 12.0 G21-930 14.0 G21-933 14.0 G21-930

319.00 425.00 375.00 465.00 365.00 499.00 555.00

S88-530 X466

17.0 17.0

G21-891 G21-930

5-1/4"

Ball

5-15/16" Ball

21.0 G21-897

Deluxe Heatmaster Condenser Fan Motors PSC, 48 Frame, Open Air Over Features: • Patented canopy design • Fan blades move cooling air through the motor for extra performance and long life • Electrically reversible • 70°C ambient • Heavy-duty ball bearings

• All 5/8" diameter shafts have flat and key • All models, except S88-407 , are suitable for use with solid state speed control devices Note: S88-219 and S88-407 are supplied with conversion kit allows their use in 56 frame wire belly band basket

Shaft Diam.

Shaft Length Rot.

Bearing Type

Capacitor To Match

Each

Order # Mfg. #

Diam.

HP Volts

RPM Speeds F/L Amps Efficiency

“A” Dim.

Wt. Lbs.

S88-215 S88-216 S88-471 S88-217 S88-218 S88-219

FC1046F 5-5/8" FC1066F 5-5/8" FC1066AF 5-5/8" FC1086F 5-5/8" FC1086AF 5-5/8" FC1106F 5-5/8"

2/5 200-230/460 1075 1 3/5 200-230/460 1075 1 3/5 200-230/460 1075 1 4/5 200-230/460 1075 1 4/5 200-230/460 1075 1

3.20 65% 1/2" 4.00 65% 1/2" 4.00 65% 5/8" 4.60 65% 1/2" 4.60 65% 5/8" 6.40 65% 5/8" 7.00 65% 5/8"

3-1/2" 3-1/2" 3-1/2" 3-1/2" 3-1/2"

Rev. Rev. Rev. Rev. Rev. Rev. Rev.

8-13/32" Ball

15.4 G21-930 17.8 G21-933 19.3 G21-933 31.0 G21-909 26.2 G21-909 31.6 G21-913 31.0 G21-913

775.00 905.00 905.00 1199.00 1199.00 1399.00 1599.00

7"

Ball

10-5/16" Ball 11-29/32" Ball 11-29/32" Ball 12-21/32" Ball 13-3/32" Ball

1

200-230/460 1075 1

4" 4"

S88-407 FC1156F 5-5/8"

1-1/2 200-230/460 1075 1

37

JohnstoneSupply.com