©Johnstone Supply eCatalog 216

CONDENSER FAN MOTORS 48 Frame Permanent Split Capacitor

Standard-Duty Condenser Fan Motors PSC, 48Y Frame, Open Air Over Applications: • Designed for standard replacement horizontal or vertical shaft up mounting on central air conditioning condenser units Features: • Automatic thermal protection • Electrically reversible

• Shaft end plate enclosed • Energy efficient • Plug reversible • 60°C ambient except S88-713 which is 40°C ambient • Capacitor not included • Thru-bolts: four 1-5/8" long with #8-32 thread

Shaft Diam.

Shaft Length Rot.

Bearing Type

Capacitor To Match G21-933 G21-891 G21-897

Each

Order # Mfg. #

Diam. 5-5/8" 5-5/8" 5-5/8"

HP 1/4 1/2 3/4

Volts

RPM Speeds F/L Amps

“A” Dim.

Wt. Lbs.

S88-428

X213

208-230 1075 208-230 1075 208-230 1075

1 1 1

1.40 2.75 4.20

1/2" 1/2" 1/2"

6" 6" 6"

Rev. Rev. Rev.

4-1/4"

Ball Slv Ball

12.0 15.0 17.0

315.00 355.00 395.00

S88-430 X221

5"

S88-713

X298

5-1/4"

Condenser, Heat Pump, Refrigeration Condenser Fan Motors PSC, 48 Frame, Open Lead End Applications: • Horizontal or vertical shaft up applications Features: • Automatic thermal protection • Short body design • Electrically reversible

Shaft Diam.

Shaft Length Rot.

Bearing Type

Capacitor To Match

Each

Order # Mfg. #

Diam.

HP 1/4 1/4 1/3 1/2 1/2 3/4 3/4 3/4

Volts

RPM Speeds F/L Amps Efficiency

“A” Dim.

Wt. Lbs.

S81-055 S82-398 S81-054 S82-399 S82-385 S82-392 S82-384

FS1024S 5-5/8" FH1024 5-5/8"

208-230 1625 1

1.40 65% 1/2" 0.90 60% 1/2" 1.90 65% 1/2" 1.40 60% 1/2" 1.70 60% 1/2" 3.50 60% 5/8" 2.10 60% 1/2" 2.20 65% 1/2"

4.93" 1-3/5" 6.44" 1-3/5" 6.00" 4-1/4" 6.00" 6.44"

Rev. Rev. Rev. Rev. Rev. Rev. Rev. Rev.

4.0"

Slv Ball Ball Ball Ball Ball

— G21-930 15.8 G21-930 — G21-930 22.5 G21-933 16.3 G21-933 — G21-897 19.0 G21-892 — G21-897

695.00 695.00 789.00 875.00 599.00 815.00 655.00 1199.00

460

1625 2

5"

665A

5-5/8"

208-230 1625 1

— Slv

FH1054 5-5/8"

460 460 460 460

1625 2 1075 1 1075 1 1075 2

5-1/3" 5-5/8" 5-1/3" 5-5/8"

435A

5-5/8"

F1076A 5-5/8"

208-230 1075 2

158A

5-5/8"

S89-892 FH1076 5-5/8"

— Ball

Condenser Fan Motors PSC, 48 Frame, Totally Enclosed Air Over Applications: • For use on central air conditioning systems and outdoor condensing units Features: • Automatic thermal protection • All-angle mount

• Extended tie rods both ends • Flat end bells both ends • Four drilled and tapped holes in the shell (except for S89-583 ) Note: Capacitor not included

A

B

Shaft Diam.

Shaft Length Rot.

Bearing Type

Capacitor To Match G21-930

Each

Fig. Order # Mfg. #

Diam.

HP

Volts

RPM Speeds F/L Amps Efficiency

“A” Dim.

Wt. Lbs.

S89-430 D919

A A A B A A B B

5-5/8" 1/8 5-5/8" 1/6 5-5/8" 1/5 5-5/8" 1/4 5-5/8" 1/4 5-5/8" 1/3 5-5/8" 1/3 5-5/8" 1/2

208-230 1075 1 208-230 1075 1 208-230 1075 1 208-230 1075 1 208-230 1075 1 208-230 1075 1 208-230 1075 1 208-230 1075 1

0.90 65% 1/2" 1.00 65% 1/2" 1.50 65% 1/2" 1.80 65% 1/2" 1.80 65% 1/2" 2.40 65% 1/2" 2.60 65% 1/2" 3.70 65% 1/2"

6" 6" 6"

Rev. Rev. Rev.

3-3/4" Slv 3-3/4" Slv

8.2

295.00 275.00 305.00 239.00 265.00 285.00 255.00 335.00

S89-217 S89-429 S89-581 S88-894 S88-895 S89-582 S89-583

D917 D906

12.0 G21-930 12.0 G21-930 12.3 G21-930 11.2 G21-930 13.4 G21-933 14.1 G21-933 17.2 G21-891

4" 4" 4"

Slv Ball Slv Slv Ball Ball

D7909

6-1/2" Rev. 6-1/2" Rev. 6-1/2" Rev. 6-1/2" Rev. 6-1/2" Rev.

D909 D908

4-1/2" 4-1/2"

D7908 D7907

5"

Don't forget to remove appropriate Condensation Drain Plug. Drain holes should be at lowest point in motor to permit proper condensate drainage.

35

JohnstoneSupply.com