©Johnstone Supply eCatalog 216
REFRIGERATION & AIR CONDITIONING Parker Industrial Solenoid Valves
Gold Ring™ Steam and Hot Water Industrial Solenoid Valves • Direct acting, two-way hot water and steam valves
• Industrial brass body construction • Ethylene propylene seals withstand up to 300°F and 50 PSI, are specifically designed for hot water and steam applications • All valves sold without coil
• Used in a variety of applications, including: dry cleaning, steam irons, steam baths, sterilizers and laundry equipment • Maximum pressure ratings are for water
Each
Order #
Mfg. #
Type
Conn. Size Orifice Size Cv
Height 3.84” 3.84” 4.00”
Length 2.81” 2.81” 2.91” 4.50” 4.50”
Max. Pressure Minimal OPD Max. Temp.
W69-358 06FS3C2340ACF Normally-Closed 3/8" FPT 5/8"
3.00 4.00 5.00
150 150 150 150 150
0 0 0 1 5
300°F 300°F 300°F 300°F 300°F
575.00 625.00 735.00 1599.00 2099.00
W69-257 W69-258
08FS3C2340ACF Normally-Closed 1/2" FPT 5/8" 12FS3C2348ACF Normally-Closed 3/4" FPT 3/4"
W69-359 16FS5C2364ACF Normally-Closed 1" FPT
1"
12.20 4.10” 22.50 5.00”
W69-361
24FS4C2380AAF Normally-Closed 1-1/2" FPT 1-1/2"
High Temperature Industrial Solenoid Coils • Class “H” industrial solenoid coil is high temp. rated up to 311°F • Ideal for use in high ambient conditions
cleaning, steam baths and industrial laundry equipment • Fits Parker Gold Ring™ industrial solenoid valves • NEMA 4 conduit hub connection
• Specifically designed high pressure hot water and steam applications such as boilers, dry
Each
Order #
Mfg. #
Volts
Watts
W69-362
CH4C01
24VAC 120VAC 240VAC
11 11 11
515.00 515.00 519.00
W69-363 CH4C05 W69-364 CH4C15
CRO(T) Series Crankcase Pressure Regulators • Protects compressor from overloading after defrost or off cycle • Automatically throttles vapor flow until compressor can handle load
• CROT regulator includes 1/4" SAE access fitting on inlet • Rated capacity is nominal tons at 100°F condenser, 10°F superheat, 0°F subcooling and listed evaporator temperature and valve setting with 1/2 psi pressure drop Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
• All models respond to outlet pressure • Prevents the suction pressure from rising above valve setting • Installs in suction line between evaporator and compressor
Each
Order #
Mfg. #
R22 Capacity
Conn. Size 3/8" ODF 1/2" ODF 1/2" ODF 3/8" ODF 3/8" ODF 1/2" ODF 1/2" ODF 5/8" ODF 7/8" ODF 1/2" ODF 5/8" ODF 7/8" ODF 1/2 ODF 1/2" SAE 5/8" ODF 5/8" SAE 7/8" ODF 1-1/8" ODF 1/2 ODF 5/8" ODF 7/8" ODF 7/8" ODF 1-1/8" ODF 1-3/8 ODF 1-1/8" ODF 1-3/8 ODF
Pressure Range PSIG
B17-400 B17-401 B17-402 B17-859 B17-860 B17-861 B17-862 B17-863 B17-864 B17-865 B17-866 B17-867 B17-403 B17-404 B17-405 B17-406 B17-407 B17-408 B17-409 B17-410 B17-411 B17-412 B17-413 B17-414 B17-415 B17-416
CRO-4 0/20 .12 @ -20° and 20 psi CRO-4 0/20 .12 @ -20° and 20 psi CRO-4 0/50 .12 @ -20° and 30 psi CRO-4 0/50 .12 @ -20° and 30 psi CRO-4 0/75 .12 @ -20° and 40 psi CRO-4 0/75 .12 @ -20° and 40 psi CRO-6 0/60 .52 @ -20° and 30 psi CRO-6 0/60 .52 @ -20° and 30 psi CRO-6 0/60 .52 @ -20° and 30 psi CRO-6 30/110 .79 @ +20° and 70 psi CRO-6 30/110 .79 @ +20° and 70 psi CRO-6 30/110 .79 @ +20° and 70 psi CROT-6 0/60 .52 @ -20° and 30 psi CROT-6 0/60 .52 @ -20° and 30 psi CROT-6 0/60 .52 @ -20° and 30 psi CROT-6 0/60 .52 @ -20° and 30 psi CROT-6 0/60 .52 @ -20° and 30 psi CROT-6 0/60 .52 @ -20° and 30 psi CROT-6 30/110 .79 @ +20° and 70 psi CROT-6 30/110 .79 @ +20° and 70 psi CROT-6 30/110 .79 @ +20° and 70 psi CROT-10 0/60 1.83 @ -20° and 30 psi CROT-10 0/60 1.83 @ -20° and 30 psi CROT-10 0/60 1.83 @ -20° and 30 psi CROT-10 30/110 2.89 @ +20° and 70 psi CROT-10 30/110 2.89 @ +20° and 70 psi
0–20 0–20 0–50 0-50 0-75 0-75 0-60 0-60 0-60 0–60 0–60 0–60 0–60 0–60 0–60 30-110 30-110 30-110 30–110 30–110 30–110
739.00 615.00 739.00 739.00 739.00 739.00 849.00 849.00 849.00 849.00 849.00 849.00 785.00 859.00 785.00 859.00 785.00 859.00 859.00 785.00 859.00 1099.00 1099.00 1099.00 1245.00 1245.00
0–60 0–60 0–60
30–110 30–110
1271
JohnstoneSupply.com
Made with FlippingBook Annual report maker